My hi-tech Library

"Start the energy furnace, start the energy storage!" After five minutes passed, the project leader - Chen Xuewen ordered in a deep voice.

"Yes, the energy furnace is energized." A staff member pressed the start button of the energy furnace in response to the order.

The next moment, the rotating cold nuclear fusion device on the monitoring screen suddenly vibrated, and the energy furnace below, like a monster awakening from a deep sleep, erupted with a roaring roar, red rays of light bloomed, and a huge amount of energy gathered.

"Report the energy value and prepare to open the material delivery pipe." Chen Xuewen stared at the temperature of the energy furnace and ordered again.

Hearing this, all the staff members nervously controlled it.

"The temperature of the energy furnace has risen, currently: 6000 degrees Celsius, 6200 degrees Celsius, ..."

"The material cabin is ready to be opened. The current first process is to transport nickel powder particles..."

"The strong magnetic field starts to work, the field strength: 10.2T.

"The fusion reactor, the current five air pressures..."

In the control room of the laboratory, the rhythm of the situation report is fast-paced, one after another, and it is continuous, as if after countless cooperative drills. run.

Monitoring the big screen, the rotary cold nuclear fusion device started to work, just like a small sun, the energy furnace released a dazzling red light, and the vibration of the force field of "Buzz!" can be heard endlessly.

Compared with thermonuclear fusion, the operation of cold nuclear fusion equipment is much smaller. By monitoring the large screen, you can clearly see its internal work status.

The nickel powder particles enter the fusion reactor through the material delivery pipe, and then another pipeline, the non-radioactive catalyst specially configured for cooked rice, in the reactor, the hydrogen, nickel powder particles and the catalyst begin to mix, in a specific environment, inside the reactor The temperature and pressure gradually rise, forming a certain cyclone.

Materials, catalysts, and energy are continuously accumulated in the fusion reactor, and under the impact of a strong magnetic field and a strong particle flow, particle reactions begin to occur.

Li Yi, Sun Bingwen, all the experts, professors and researchers at the scene held their breath and stared at the big screen.

The fusion reactor of the rotary cold nuclear fusion device, the cyclone is rapidly rotating, the high temperature continues, and the shining light is very dazzling.

Chen Xuewen raised his hand and glanced at his watch. Fifteen minutes have passed since the start of the experiment. The rotating cold nuclear fusion device is operating normally, the magnetic field is stable, and the temperature in the reactor is rising.

"The temperature of the fusion furnace rose to 1.24 million degrees Celsius."

"The magnetic field has risen to 35T!"

"The current fusion furnace: 12 atmospheres!"

"There is a first-order change in the fusion furnace, and the prototype of the whirling particle flow model appears!"

"...!"

While observing the operation of the Rotary Cold Nuclear Fusion Unit, the scientific researchers reported various data and equipment status continuously, providing the working conditions of each system of the Rotary Cold Nuclear Fusion Unit.

The machines are 'roaring', the energy is gathering.

Time passed bit by bit, and nearly an hour passed in the blink of an eye.

The atmosphere in the control room is a bit dignified. The rotary cold nuclear fusion device has been running normally for almost an hour. The temperature of the fusion furnace, the strength of the force field, the pressure strength, ..., etc., the environmental conditions in all aspects have reached the level of cold nuclear fusion. Theoretical claims, however, that the expected nuclear fusion reaction has been slow to take place.

"What's the matter, why hasn't nuclear fusion been sent? It's not a failure, is it?"

"Strange, why haven't we started yet? What went wrong?"

"Is the temperature not meeting the fusion requirements?"

...

Looking at the operation status of the rotating cold nuclear fusion device on the monitoring screen, many scientific research staff at the scene couldn't hold back their breath and began to talk in a low voice.

"Old Chen? Is there something wrong?" Sun Bingwen looked at Chen Xuewen and asked in a deep voice.

Gu Tiao

"It shouldn't be! The experiment was very successful, and all the data met the data requirements of cold nuclear fusion, which is consistent with the data of the simulation experiment!" Chen Xuewen was stunned. Looking at the experimental data on the console, he could not find the reason for the failure.

The various modules of the rotary cold nuclear fusion device are running normally, the materials are transported into the fusion furnace, and various data have exceeded the fusion critical point, but the nuclear fusion phenomenon in the fusion furnace has not occurred for a long time.

Did the experiment fail?

Clearly broke through the critical point of cold nuclear fusion, but the nuclear fusion reaction did not occur.

"The products of the thermonuclear fusion reaction will emit neutrons and gamma rays. The release of this cold nuclear fusion experiment does not match the reaction products such as neutrons and gamma rays. It should not work in this direction!"

"Why not! We have already conducted a simulation experiment, and it is completely feasible!"

"What if the simulation experiment is successful, I don't know what conditions are owed now!"

"Is the pressure not enough, we should continue to increase the pressure!"

"Can't continue to pressurize, the fusion furnace has reached a safe value, and re-pressurization will destroy the tightness of the fusion furnace."

"Pressurization is not enough, continue to heat it!"

"Neither. According to the high-speed particle model, the fusion model cannot be formed if the temperature continues to rise."

"..."

The scientific research workers in the monitoring control room began to discuss in a low voice, worrying about gains and losses, and lost the confidence they had before the experiment started.

Sun Bingwen couldn't help getting anxious, turned his head to look at Li Yi, and saw that his old **** was there, looking calm, he couldn't help but breathe a sigh of relief.

Li Yi didn't make a statement, it should be successful!

The expert and professor sitting behind Li Yi saw Li Yi's calm look and wanted to say something, but couldn't help but take it back.

Time passed bit by bit, time flickered, and another half an hour passed.

The rotary cold nuclear fusion device was still running, however, the nuclear fusion reaction still did not take place, and the faces of the researchers became ugly.

"How did that happen?"

"Why isn't there a fusion reaction, why!"

"There's something wrong with that step? It shouldn't be!"

"..."

Bit by bit, the engineers murmured in dismay, their voices full of frustration.

With sufficient experimental data and theoretical support~www.novelhall.com~ everyone is full of expectations for the success of the cold nuclear fusion project. For the realization of cold nuclear fusion technology, they have been working without sleep for several months, and have been developing equipment over and over again. experiment.

Finally, the requirements of the first experiment were fulfilled.

Although the failure rate of scientific experiments is very high, this unexplained failure is too shocking.

The scientific researchers on the scene could not help but doubt the possibility of the success of the cold nuclear fusion project.

"The spin model is the core of the cold nuclear fusion reaction. The model data is wrong, and the impact strength of the No. 1 particle tube needs to be increased." At this time, Li Yi suddenly reminded.

Hearing this, the spirits of all the scientific researchers were all lifted up, showing a sudden look.

"Yes, yes, increase the particle strength!"

"It turned out to be a model problem!"

...

After Li Yi's point, this cold fusion experiment was immediately possible to succeed. All the researchers immediately cheered up and continued to carry out the experimental operation.

Visit and read more novel to help us update chapter quickly. Thank you so much!